Clicking this will open up a pop up with information on the pending firmware update and give you the option to install an over the air firmware update.Īlternatively multiple devices can be updated via the burger menu in the top right of the devices panel, by selecting any of your devices, then opening the burger menu, selecting the “Update Firmware” option. If you have an update pending you will see a yellow warning triangle will appear in the device cell. MOTE: The MOTE can be updated via the device page on either the device cell or from the Burger menu located at the top right of the devices page. Any existing data for this device on the EasyLog™ Cloud will be archived for safe-keeping. Depending on the previous firmware version, your device may be in a factory-reset condition following a firmware update, and will need to be connected to the EasyLog™ Cloud using the EasyLog™ WiFi Software. To benefit from the latest improvements we recommend using the latest firmware releases for your devices. You’ll need to connect the device to the PC using the USB cable provided then follow the on-screen instructions to download and update the latest firmware versions.
EASYCLOUD BOOTS SOFTWARE
You can update the firmware in a device by running the Firmware Updater software (installed on your PC with the WiFi Sensor Software).
EASYCLOUD BOOTS CODE
WIFI: The WiFi devices contain program code that runs internally, often referred to as firmware. Only the types listed are supported.ĩ) Make sure that the SSID name does not contain spaces. Make sure that the configured DHCP IP address range allows the addition of new devices if not, then extend the range.Ĩ) If your wireless network uses WPA Enterprise, make sure that the correct authentication type is selected from the drop-down box. Normally, the DHCP service runs in either your router or on a network server. This allows the device to be allocated an IP Address.
EASYCLOUD BOOTS PASSWORD
Alternatively, search the web for resources to help convert your password to a HEX key.ħ) Check that DHCP service is running. You can find the HEX key in the internal settings of your access point or router. If it is switched on, only known devices will be able to connect to your router.ģ) Check that your network has an internet connection.Ĥ) Check that the device is in range of the router.ĥ) Check to see if the router has the latest firmware.Ħ) If the access point or router has WEP Encryption ensure that the HEX key is being entered rather than the password. Is the Width longer than the Length? If so, unfortunately, we do not recommend any hoof boot styles for your horse.WIFI/MOTE: You can try any or all of these steps to help with this problemġ) Check that the password being entered is correct.Ģ) Ensure MAC filtering is not switched on in the access point or router.Is the Length longer than the Width? If so, we recommend the Cavallo Slim Sole Styles (for horses whose hooves are 1/4" - 1/2" longer) and most Eas圜are EasyBoot Styles.Are your measurements the same, or nearly the same? If so, we recommend the Cavallo Regular Sole Styles and most Eas圜are EasyBoot Styles.Analyzing your measurements: Once you feel confident in your measurements, there are a few important questions:.
You are measuring what that imprint would be. If it helps to visualize, imagine painting the bottom of your horse's hoof and then stamping it on the ground. We have a diagram included in our Measuring Guide (linked below), but the most important thing here is that you want to make sure you do not include the heel bulbs in your measurement. The definition of buttress changes from farrier to hoof boot manufacturer, so what you really want to make sure you're measuring is the weight-bearing wall of your horse's hoof.
0 kommentar(er)
